1 Stück: BJ 1986, Tischgröße ca. 850x530mm, Füllhöhe ca. 390mm, Verfahrwege X-Y-Z ca. 500x350x400mm, Maschinengewicht ca. 4.300 kg, Maschinengröße ca. 2,4x2,25x3,0m, Anlage mit Kopfspülung, Kühlg...
1 Stück: BJ 1995, Spitzenhöhe ca. 180mm, Spitzenlänge 1.200mm, mit Zubehör, Lünette, Backenfutter, 1 Revolverkopf, Aufspannfutter
1 Stück: BJ ca. 1984, Masch/N 1335 und Masch/N 2101-0147, Verfahrwege X-Y-Z ca. 800x400x300mm, Vorschub X-Y-Z, Maschinengröße ca. 1,88x1,7x1,850m, Gewicht ca. 2.300 kg, Schwenktisch, Digitalanzei...
1 Stück Deuzer Wende-/Drehvorrichtung , Wende-/ Drehvorrichtung für Träger der Fa. DEUZER Maschinenfabrik Heitze GmbH & Co. ab Standort Körnebachstraße 50c, 44143 Dortmund
1 Stück: S/N 5451207, BJ 1989, 16-fach Werkzeugwechsler, Verfahrwege 700/500/550, abgelesene Betriebsstunden 7.635,4, incl. Pos. 214 Diverse Werkzeuge und Zubehör für die Pos. 208
1 Stück Wendevorrichtung Rohre und Bauteile bis D1400mm, Werkstückgewicht: bis 5 to. Bauteillänge: bis 10 m Ein Bock ist angetrieben der Andere läuft lose mit. Die Ausspannplatte hat die...
1 Stück: S/N 0.1.09, BJ 1995, Verfahrwege X/Y/Z 500/350/400, 8-fach Werkzeugwechsler incl. Pos. 212 Diverse Werkzeuge und Zubehör für die Pos. 206
1 Stück: S/N 1.1.29, BJ 1994, Verfahrwege X/Y/Z 700/500/515, 16-fach Werkzeugwechsler incl. Pos. 213 Diverse Werkzeuge und Zubehör für die Pos. 207
1 Stück: S/N 20031, Arbeitstisch Länge/Breite 576/400mm, Dielektrikum über Tisch 265mm, Werkstückgewicht 500 kg, Arbeitskopf x/y/z = 350/250/315mm, Eilganggeschwindigkeit 800mm/min, Stellmaß 2,38...
1 Stück: Nr. T06-339, BJ 1982, Maschinengewicht 22,6t, mit Schaltpultanlage, Handsteuerung
1 Stück CNC Vertikal-Fräsmaschine Droop & Rein FS 130 SKE, Auftrags-Nr. 04971, BJ 1978, mit Schaltschrank, Bh 60.404, Spindel Bh 18.194, Verfahrwege X/Y/Z, Tischfläche ca. 2,40 x 1,00 m Hyd...
1 Stück CNC Vertikal-Fräsmaschine Droop & Rein FS 130 SKE, Auftrags-Nr. 04971 BJ 1978 mit Schaltschrank Bh 60.404 Spindel Bh 18.194 Verfahrwege X/Y/Z, Tischfläche ca. 2,40 x 1,00 m ...
1 Stück CNC Vertikale-Fräsmaschine Droop & Rein FSM 803 DA 30 KCN, Auftrags-Nr. 06162, BJ 1989, Aufspannnutentisch, ca. 3,6x0,8m, Kopierbereich XY-Ebene, ca. 1,6x0,8m, Arbeitsbereich XY-Ebe...
1 Stück CNC Vertikale-Fräsmaschine Droop & Rein FSM 803 DA 30 KCN, Auftrags-Nr. 0616 BJ 1989 Aufspannnutentisch, ca. 3,6x0,8m Kopierbereich XY-Ebene, ca. 1,6x0,8m Arbeitsbereich XY-Ebe...
1 Stück: Typenschild nicht ersichtlich, Abmaße des Außengehäuses ca. 1,4mx1,7x2,8m hoch
1 Stück: bestehend aus: 7 Behältern mit unterschiedlichen Medieninhalten, Behälter inkl. 3 beheizbaren Behälter inkl. Steuerschrank, noch befüllt mit einzelnen Medien/Flüssigkeiten (u.a. Öl und W...
1 Stück Tauchbad, Eigenbau, mit 2 Tauchkurven, dazugehörigem Stahlarbeitstisch, Breite ca. 2,5m, Tiefe ca. 1m ab Standort Am Mühlbach 29 a, 87642 Halblech
1 Stück Senk-Erodiermaschine Schiess Nassovia FF501, S/N 65509603, Inv/N 1000498, BJ 1980, Tischgröße ca. 300x500mm, Behältergröße ca. 600x400x300mm, digitale Verfahrweganzeige in 3 Achsen,...
1 Stück Drahterodiermaschine Charmilles Robofil 200, Incl. Schaltschrank, Nr. 20551, defekt, Defekt nicht bekannt ab Standort Am Mühlbach 29 a, 87642 Halblech
1 Stück: mit kleinen Antriebsmotoren, Stellantriebe und dazugehörige Anschlussleitungen
1 Stück: BJ ca. 1950, auf Metallgestell montiert mit E-Motor, der dazugehörige Flüssigkeitsbehälter fehlt
1 Stück Arbeitstisch, 0,8x1,5m, Arbeitsplatte Massivholz, Stärke 5cm, 4 Ablagefächer ab Standort 01471 Radeburg
1 Stück Posten Diverse Vorrichtungen, mit 2 Metallregalen, verschraubt, je 3 Ebenen, Breite je 1m, Höhe 1m, Tiefe 0,5m ab Standort 01471 Radeburg
1 Stück Manueller Folienabroller, Ohne Wickelfolie ab Standort An der Breite 4, 87642 Halblech
1 Stück Arbeitstisch, mit Einhausung, ca. 0,6x0,8m, mit Strom- und Pneumatikanschluss, Pneumatikschleifer, Beleuchtung, inkl. Beistelltisch, 0,6x1,5m, Arbeitsplatte Holz ab Standort 0...
1 Stück Papierrollenständer Förch, ab Standort Am Mühlbach 29 a, 87642 Halblech
1 Stück Aluminium-Heizöltank, Fassungsvolumen ca. 800-1.000l, kein Typenschild vorhanden, mit Restinhalt unbekannt „ohne Palette“ ab Standort 97357 Prichsenstadt
Metalworking is one of mankind’s most important achievements in history. The possibilities are almost unlimited. There are only a few products without at least one metal component.
Tools for separating processes include, among others, lathes, milling machines (e.g. a used multi-purpose milling machine), cutting, and grinding machines. But plate shears and sheet shears belong to this category. These aids are used to cut sheet metal in a linear direction. Second-hand die-cutting and notching machines, on the other hand, serve to machine defined areas of the blank.
Even machining with a used drill ranks among this metal processing field. These machines are used, among other things, for setting stud and through holes. Used milling machines and lathes play an important role in precision machining. The former creates particularly complex contours. The latter, in turn, allows the production of rotationally symmetrical bodies. The "king" among the milling machines is the CNC machining centre. This device combines turning, milling, and often also drilling with repeatable accuracy and constant quality. These centres are the most complex and therefore also the most expensive machines in metalworking. Through us, however, you can bid on your CNC machining Centre at the lowest possible price.
Second-hand grinding, polishing, and lapping machines are used to finish surfaces. These machines guarantee millimetre-precise removal and thus maximum precision in metalworking. Finishing a material serves the achievement of specified tolerances as well as preparing it for galvanic coating. Apart from polishing and grinding, there are additional surface treatment methods.
Welding is considered the most used process for joining aluminium and other metals. You can choose between simple forms such as friction welding and more complex forms such as gas welding and electric welding. The range of machines available is very broad, from handy welding machines to large stationary welding machines. Two further possibilities for joining metal are riveting and gluing, and submerged arc welding is used for particularly thick large parts.
We offer many additional machines and aids for metal processing. A few examples would be used three-roll bending machines, die stocks, and double grinding blocks. Should you require further information on our offers or the process of our online and on-site auctions, please do not hesitate to contact us at any time. We are pleased to provide you with advice and are a competent partner when it comes to the auction of metalworking machinery.