1 Stück: Nr. 1166-2, Steuerung DR40 DIGI, Aufspannfläche Tisch ca. 800x1.300mm, incl. 1 Schubkastenschrank, ca. 0,7x0,8x1,1m, 7 Schübe, Inhalt diverse Bohrer, diverses Zubehör zur Bohr- und Fräsm...
1 Stück: incl. Magnetfußständer und Handmaschine, incl. Transportrollwagen, 1-achsig
1 Stück: incl. Magnetfußständer und Handmaschine, incl. Transportrollwagen, 1-achsig
3 Stück: blau, Inhalt 3 Rohrbrennschneidmaschinen, 1x Turb o Cut II für Trenn- und Schrägschnitte von Stahlrohren mit Ø 110mm bis 260mm, 1x Turb o cut III für Trenn- und Schrägschnitte von Stahlr...
1 Stück: S/N 6609047/16-31-2, incl. Aufspannwürfel, ca. 800x1.000mm, blau/grau, Maschine ist demontiert und über ein Jahr nicht mehr gelaufen
1 Stück: Typenschild nicht ersichtlich, Aufspannwürfel ca. 600x800mm, Maschine ist demontiert und über ein Jahr nicht mehr gelaufen
1 Stück: S/N 8070021, mit höhenverstellbarem T-Nuten-Aufspanntisch, ca. 0,4x0,4m, 1 Maschinenschraubstock
1 Stück: Fab/N 9364, BJ 1992, 308V, Anschlusswert 30kW, Maschinengewicht 26,7t, incl. Aufspanntisch, digitaler Werkstücksteuerung, Schaltschrank
1 Stück: Masch/N RB-A1013, mit Aufspanntisch, ca. 0,7x0,6m, Gewicht ca. 2,6t, 3kW,
1 Stück: Masch/N 6807, incl. dazugehöriger Werkbank, ca. 1,6x0,7m, im unteren Bereich 1 offenes Regalteil, 2 Schübe
1 Stück: S/N 674, BJ ca. 1960, 2.800/2.400U, 1,5PS, kein weiteres Typenschild vorhanden
1 Stück: Spindel-Aufnahme: MK 3 Pinolenhub: 180 mm Bohrleistung, reparaturbedürftig
1 Stück: 1 kleiner Maschinenschraubstock und 1 Doppelschleifbock, vermutlich defekt
1 Stück: S/N 2721-120-2272, mit T-Nuten Aufspanntisch, ca. 0,6x0,2m, 1 Maschinenschraubstock, 2-Achsen Digitalanzeige Heidenhain, 1 Stahlblechschrank, ca. 0,5x0,7x0,7m, 7 Auszüge, Inhalt Maschine...
1 Stück: mit Werkzeugbearbeitungstisch Hennig, Bearbeitung von Steuerwelle, Kurbelwelle, Pumpenzylinderexzenter, mit Steuerschrank und Hydraulikaggregat
1 Stück: mit Werkzeugbearbeitungstisch Hennig, Bearbeitung von Steuerwelle, Kurbelwelle, Pumpenzylinderexzenter, mit Steuerschrank und Hydraulikaggregat
1 Stück: mit Werkzeugbearbeitungstisch Hennig, Bearbeitung von Steuerwelle, Kurbelwelle, Pumpenzylinderexzenter, mit Steuerschrank und Hydraulikaggregat
1 Stück: zum Teil Eigenbau, 3 Achsen, waagerecht mit Hydraulikaggregat, Steuereinheit, Steuerschrank, Werkzeugschrank, Werkzeugtisch
1 Stück: zum Teil Eigenbau, 5 Achsen, verschiedene Bohrgrößen, Hydraulikaggregat, Steuereinheit, Werkzeugzubehör
1 Stück: zum Teil Eigenbau, 5 Achsen, verschiedene Bohrgrößen, Hydraulikaggregat, Steuereinheit, Werkzeugzubehör
1 Stück: Inv/N 1368, Eigenbau, mit Hydraulikaggregat, Schaltschrank, Steuereinheit
1 Stück: Typ PE 200, Nr. 38187, BJ 1977, Inv/N 1413, Eigenbau, inkl. Werkzeuge und Zubehör
1 Stück: Inv/ 1322, BJ 10/1973, mit Schaltschrank, Schalteinheit Burkhardt + Weber, Werkzeugschrank, Zubehör
1 Stück: Inv/ 1351, BJ 04/1977, mit Schaltschrank, Schalteinheit Burkhardt + Weber, Zubehör
1 Stück: Inv/N 1285, Masch/N 32128, BJ 1969, Ausleger 1.250mm, mit Werkzeugaufspanntisch 0,5x0,5x0,6m, mit Werkzeugschrank, Zubehör, Werkzeugdrehstähle, Bohrer, Bohrspannfutter, etc.
1 Stück: 5 pneumatische Bohrer, 4 bar Betriebsdruck, BJ 1987, mit Arbeitstisch, Steuereinheit
1 Stück: S/N 91, X 700mm, Y 500mm, Z 800mm, Masch/N 901, Int/N 1313, inkl. Metallschubkastenschrank, Inhalt Werkzeuge
1 Stück Tischbohrmaschine Einhell TB 13/5 ED, 0,25kW, max. 13mm Bohrdurchmesser ab Standort 65239 Hochheim
1 Stück Radialbohrmaschine Donau DR 40 Digi , Nr. 1136-3, BJ 4/1987, Bohrleistung 40mm bis 50mm, max. Bohrtiefe 200mm, Aufspannfläche 0,7x1,2m, incl. Werkzeugtransportwagen mit 1 Posten Gew...
1 Stück Horizontal Bohr- und Fräswerk Union BFP 125/5, Masch/N 10279, BJ ca. 1975, Anschlusswert 30kW, Gesamtgewicht 27,5t, Steuerung, Digitalanzeige Heidenhain XY, Werkzeugtisch, Fab/N 820...
1 Stück Schnellradialbohrmaschine Donau DR 32, Masch/N 644-2, 380V Betriebsspannung, Drehzahlbereich von 0U/min bis 1.800U/min, Nutenaufspanntisch, ca. 0,5x1m, incl. 1 Posten Bearbeitungswe...
1 Stück Radialbohrmaschine WMW BR 40, Ausladung ca. 1.250mm, Drehzahlbereich von 22,4U/min bis 2.800 U/min, 380V, Werkstückhöhe max.: 1390 mm ab Standort 61352 Bad Homburg
1 Stück Radialbohrmaschine WMW (VEB Werkzeugmaschinenfabrik Magdeburg), Typ BR 56, Fab/N 793700-392, BJ 1968, Ausladung 1.600mm, incl. Aufspannwürfel mit Nuten, ca. 1x1x1m, Holztransportwag...
1 Stück Universal Bohr- und Fräsmaschine Bohner & Köhle F3, Fab/N 579, BJ 1966, Tischgröße ca. 0,8x1,6m, Tischverstellung längs ca. 1,8m, Tischverstellung quer ca. 0,7m, Werkzeugaufnahme IS...
1 Stück Tischbohrmaschine/Bohrwerk Union BFT 100/III, Fab/N 8344, BJ 1964, Arbeitsspindeldurchmesser 100mm, Planscheibendurchmesser 680mm, Aufspannfläche 1,12x1,25m, drehbar, Höhenbewegung ...
1 Stück Fräs- und Bohrmaschine Deckel FP 2 LB, Masch/N 0635, BJ ca. 1960, mit Werkzeugpositionierung Heidenhain XYZ, verschiebbarer Senkrecht-Fräskopf mit ISA Kegel 40, Motordrehzahl 1.450,...
1 Stück Radialbohrmaschine Donau Schnellradiale DR 32, Fab/N 6724, BJ 1968, Aufspannfläche ca. 0,6x1,25m ab Standort 61352 Bad Homburg
1 Stück Radialbohrmaschine Donau Schnellradiale DR 32, Fab/N 654-4, BJ 1968, Aufspannmaß ca. 0,6x1,2m ab Standort 61352 Bad Homburg
1 Stück Bohrerschleifmaschine Technomat mit Optik Tatar, Typ Universal, Werkzeugschrank und Zubehör ab Standort 61352 Bad Homburg
1 Stück Radialbohrmaschine Donau Schnellradiale DR 32, Masch/N 672-3, BJ 1968, Aufspannfläche ca. 0,6x1,2m, Bohrspindeldurchmesser 50mm, Bohrung 72mm, Kegel MK4 ab Standort 61352 Bad ...
1 Stück Doppelfräs- und Bohrkopf, BJ 1969, für Senkrecht-Kopier-Fräsmaschine FS 130 Droop & Rein ab Standort 61352 Bad Homburg
1 Stück Doppelfräs- und Bohrkopf, BJ 1969, für Senkrecht-Kopier-Fräsmaschine FS 130 Droop & Rein ab Standort 61352 Bad Homburg
1 Stück Säulenbohrmaschine Alzmetall AB35 S, S/N 01647 ab Standort 78333 Stockach
1 Stück Tischbohrmaschine Flott TB6, Kein Typenschild mehr lesbar ab Standort 78333 Stockach
1 Stück Radialbohrmaschine Alzmetall AB 30 R, S/N 1548, BJ 1984, Aufspanntisch (Spannwürfel) ca. 700x800mm, Ausladung ca. 1.000mm, Drehzahlbereich bis max. 1020 U/min., Pinolenhöhe ca. 200m...
Drills are among the devices that are largely self-explanatory. These are semi-automated devices that make it easy to drill holes of any size. The designs can vary widely, which can range, for example, from the intended application, through the machined material to the drilling strength. Paired with many special applications, there are a variety of versions of drills that you can use specifically for your purposes.
Of course, these are indispensable in the craft trades, but other fields of work and even private individuals can make use of the "all-purpose weapon" drilling machine. Therefore, we would like to point out different versions of the drill and offer you a decision basis. In an auction you can then buy the appropriate model for your purpose with a little luck.
When looking at the different types of drills, it quickly becomes clear that there are countless differences between the models except for the basic principle. On the one hand, it has to be differentiated, whether it is permanently installed or mounted drills, or hand-operated versions. For example, the fixed installations offer the advantage that they can easily be integrated into repetitive work processes, while the hand-operated ones are flexibly designed for a multitude of other applications. Even within these two upper categories must then be distinguished.
For example, fixed boring machines have radial boring machines that are considered excellent for large workpieces. Magnetic drilling machines, by contrast, aim to fix themselves to metal components using a built-in magnet, thus preventing slippage during the drilling process. Column boring machines and pillars also have their own advantages; accessories such as boring devices are further versions to give just a brief overview of the many possibilities.
The hand drills have one-handed drills that are particularly suitable for relatively soft materials, hard to reach drill holes and fast and flexible use. Two-handed variants are a bit inflexible, but much more powerful. The mobile use of durable materials will quickly become a breeze.
The drills you see in our offer are already in use. They stem, for example, from bankruptcies, business tasks or company restructurings. Often it is therefore still fully operational material, but the final assessment of the quality you have to do yourself, after you have considered the offers. With luck, you can land a lucky hit and buy a rugged, reliable and powerful device at a low price. At the same time you draw from a varied and changing selection.
Stability and compatibility are two factors to consider when drilling holes. Craft companies or workshops therefore rely on a large number of different drills. Especially if it is a device that should not be used daily for countless hours, the used drill is an important and cost-effective addition. So just browse through our offer and find the used drill that meets your desired specifications.